Transmitter Calibration - Emerson Rosemount 3051S MultiVariable Reference Manual

Operation and Maintenance
October 2018
WARNING
Failure to follow these installation guidelines could result in death or serious injury.
• Ensure only qualified personnel perform the installation.
Explosions could result in death or serious injury.
• Do not remove the transmitter cover in explosive atmospheres when the circuit is live.
• Before connecting a handheld communicator in an explosive atmosphere, make sure
the instruments in the loop are installed in accordance with intrinsically safe or non-
incendive field wiring practices.
• Both transmitter covers must be fully engaged to meet explosion-proof requirements.
• Verify the operating atmosphere of the transmitter is consistent with the appropriate
hazardous locations certifications.
Electrical shock could cause death or serious injury.
• If the sensor is installed in a high-voltage environment and a fault or installation error
occurs, high voltage may be present on transmitter leads and terminals.
• Use extreme caution when making contact with the leads and terminals.
Process leaks could result in death or serious injury.
• Install and tighten all four flange bolts before applying pressure.
• Do not attempt to loosen or remove flange bolts while the transmitter is in service.
• Replacement equipment or spare parts not approved by Emerson
parts could reduce the pressure retaining capabilities of the transmitter and may
render the instrument dangerous.
• Use only bolts supplied or sold by Emerson as spare parts.
Improper assembly of manifolds to traditional flange can damage sensor module.
• For safe assembly of manifold to traditional flange, bolts must break back plane of
flange web (i.e., bolt hole) but must not contact sensor module housing.
Improper installation or repair of the SuperModule
(P0)
could result in death or serious injury.
• For safe assembly, the high pressure SuperModule assembly must be installed with
ASTM A193
Class 2 Grade B8M Bolts and either a Rosemount 305 Manifold or a DIN-compliant
traditional flange.
Static electricity can damage sensitive components.
Observe safe handling precautions for static-sensitive components.
4.3

Transmitter calibration

4.3.1 Calibration overview
Complete configuration and calibration of the Rosemount 3051SMV involves the
following tasks:
108
Reference Manual
00809-0100-4803
™
for use as spare
™
assembly with high pressure option
Rosemount 3051S Multivariable Transmitter