Emerson Rosemount 3051S MultiVariable Reference Manual page 30

Configuration
October 2018
5. Enter the Molecular Weight of the Custom Gas. When the molecular weight of the
6. Select either Density or Compressibility and enter data.
7. Enter the Density or Compressibility at reference conditions.
8. Enter the Custom Gas Viscosity at the given temperatures. Note that all
9. Enter the Custom Gas Isentropic Exponent.
10. Select Next to continue with the flow configuration on the Primary Element
11. Proceed with the steps in
Custom liquid (Density [T])
About this task
The Custom Liquid option should be used for fluids not in the database such as proprietary
fluids.
Procedure
1. Expand the Liquid category.
2. Expand the Custom Liquid category.
30
gas is entered, the other data entry fields on the tab are enabled as shown in
2-16.
Note
All pressure and temperature values may be edited except the minimum and
maximum values. The minimum and maximum values were set on the Fluid
Selection tab.
temperature values may be edited except the minimum and maximum
temperatures.
Selection tab.
Figure 2-16: Custom Gas Fluid Properties Tab
Primary element selection.
Rosemount 3051S Multivariable Transmitter
Reference Manual
00809-0100-4803
Figure