Emerson Rosemount 3051S MultiVariable Reference Manual page 78

Installation
October 2018
Table 3-1: Mounting Brackets
Options
B2
B3
B7
B8
B9
BA
BC
Flange bolts
The Rosemount 3051SMV can be shipped with a coplanar flange or a traditional flange
installed with four 1.75-in. flange bolts. Mounting bolts and bolting configurations for the
coplanar and traditional flanges can be found in
Emerson are coated with a lubricant to ease installation. CS bolts do not require
lubrication. No additional lubricant should be applied when installing either type of bolt.
Bolts supplied by Emerson are identified by their head markings:
A. Carbon Steel (CS) Head Markings
B. Stainless Steel (SST) Head Markings
C. Alloy K-500 Head Marking
Note
The last digit in the F593_ head marking may be any letter between A and M.
78
(continued)
Description Mounting type
Traditional flange Panel
bracket
Traditional flange flat 2-in. pipe
bracket
Traditional flange 2-in. pipe
bracket
Traditional flange Panel
bracket
Traditional flange flat 2-in. pipe
bracket
Traditional flange 2-in. pipe
bracket
Traditional flange flat 2-in. pipe
bracket
Reference Manual
Bracket material
Painted CS
Painted CS
Painted CS
Painted CS
Painted CS
SST
SST
Cover installation. SST bolts supplied by
Rosemount 3051S Multivariable Transmitter
00809-0100-4803
Bolt material
CS
CS
SST
SST
SST
SST
SST