Emerson Rosemount 3051S MultiVariable Reference Manual page 25

Reference Manual
00809-0100-4803
2. Navigate to the save location for the configuration file, give the file a name, and
Sending a saved configuration
Procedure
1. To send a saved configuration, open Engineering Assistant in offline mode and
2. Navigate to the saved .smv file to be sent. Select Open.
3. The Engineering Assistant Device Connection screen will appear, see
4. Select the Search button located in the lower right corner of the screen.
5. When the search is completed, select the device to communicate with and select
6. Once the configuration is finished being sent to the device, a notification appears.
7. If finished with the configuration process, close Engineering Assistant.
2.4.9 Other fluid configurations
Natural gas AGA No. 8 detail characterization or ISO 12213,
molar composition flow configuration
Procedure
1. Expand the Gas category.
2. Expand the Natural Gas category.
3. Select AGA Report No. 8 Detail Characterization Method or ISO 12213, Molar
4. Select Next > to proceed to the Fluid Composition tab.
Emerson.com/Rosemount
select Save. The configuration will be saved as a ".smv" file type.
select File>Open.
Engineering Assistant will begin to search for connected devices.
Send Configuration button.
Composition Method.
example of the Fluid Composition tab for AGA Report No. 8 Detail Characterization
Method. The ISO 12213, Molar Composition Method Fluid Composition tab will
require the same information.
Configuration
October 2018
Figure 2-12.
Figure 2-13 shows an
25