Description Of Operating Modes - Mennekes AMTRON Xtra User's Operation Manual

Wechs el ein- auf z weis paltig

4.4 Description of operating modes

Functional description of manual operating mode (remote)
Start of charging
process
Controlling the charging
process
Changing the operating
mode
Response to power
failure
Without RFID card:
 Automatically after connection to the vehicle
 Manually with Charge APP
With RFID card:
 Authentication with valid RFID card
 Manually by selecting a valid RFID card in Charge APP
By using the Charge APP
 Changing the charging current for the on-going charging process
 Interrupting the charging process (pause)
 Continuing the charging process
 Terminating the charging process (stop)
By using the multi-function button:
 Terminating the charging process (stop)
The stop function with the multi-function button must be enabled during the setting-up
process.
With RFID card:
 Terminating the charging process (stop, with the same card used for starting the charging
process)
In operating mode "manual", all functions of other operating modes are suspended. The
charging power, for example, will not be controlled over time, the external tariff-switching
signal or the "SUNNY HOME MANAGER".
The Charge APP or service interface allows changing the operating mode configured during the
setting-up process. The change of operating mode will apply for the on-going and subsequent
charging processes.
The response to power failure is configured during the setting-up process.
 The charging process is aborted (default with authorisation enabled).
 The charging process is continued (default for automatic start).
12