Menu Description - Mennekes AMTRON Xtra User's Operation Manual

4.8.4 Menu description

Menu "Production Settings"
Fig. 16: Menu "Production Settings"
The menu "Production Settings" displays factory settings
and the hardware / software versions. You cannot make any
settings here.
Value Description
HMI HW Version Hardware version of the front panel
HMI SW Version Software version of the front panel
HMI Type Type of front panel
HMI IO Status Status of the front panel's inputs and
outputs
HMI Internal and external front panel
Temperature temperature
HMI Error Code Error code of the front panel
RFID Version
Version of the RFID card reader
WLAN Version Version of the WLAN module
Value Description
HCC3 HW Hardware version of the HC
Version controller
HCC3 SW
Software version of the HC controller
Version
HCC3 IO State Status of the HC controller's inputs
and outputs
HCC3 CP/PP Status of CP/PP signal contacts
State
HCC3 Error Code Error code of the HC controller
AMTRON Operating mode of the charging
Operating Mode station
 See Chapter 4.4 on page 12
AMTRON State Operating state of the charging
station
AMTRON Connector system of the charging
Connector Type station
AMTRON No. of Number of mains phases
Phases
AMTRON Rated Maximum charging current
Current
AMTRON Serial Serial number of the charging station
Number
AMTRON Order Order number of the charging
Number station
AMTRON  No external temperature sensor
External available
Temperature  External temperature sensor
Sensor available
AMTRON Local  No internal circuit breaker and
Fuses Installed residual current circuit breaker
available
 Internal circuit breaker and
residual current circuit breaker
available
AMTRON
 true: production settings read-
Production
only
Settings Write
 false: production settings write
Enabled
enabled
HCC3 Ethernet MAC address of the HC controller's
MAC Address LAN interface
HCC3 Total Sum of the charged energy in Wh
Energy
24