Led Info Bar - Mennekes AMTRON Xtra User's Operation Manual

4.2 LED Info bar

The LED info bar displays the operating status of the charging station. The colour scheme (green / blue) for "Operational /
Charging" depends on the setting over the service interface during the setting-up process.
The Charge APP uses the same symbols for displaying the operating status.
LED info bar Charge APP
lit blue lit blue
permanently permanently
pulsating green pulsating green
lit green lit green
permanently permanently
lit green animated
permanently
animated
flashes green
steady white
flashes blue
lit red
permanently permanently
Flashes red
Wechs el ein- auf z weis paltig
Description
Operational
The charging station is operational; no vehicle is connected to the charging station.
Ready to charge: vehicle pauses
All requirements for charging an electric vehicle are met.
A charging process is not taking place.
The charging process is paused due to a vehicle feedback or was terminated by the
vehicle.
Ready to charge
All requirements for charging an electric vehicle are met.
The charging process is paused due to a missing activation signal or a charging
current configuration of 0 A.
Charging process active
All requirements for charging an electric vehicle are met. Charging in progress.
green
Overtemperature warning
The charging station reduces the charging current to prevent overheating and
deactivation.
green
Wait period
Connection with vehicle is pending or has been established or charging pauses due
to specification by the Charge APP.
A subsequent action is required, such as connecting or disconnecting the charging
cable, starting the charging process by RFID card or Charge APP.
Fault
A fault prevents the vehicle from charging.
lit red
 See Chapter 6 "Troubleshooting" on page 29.
10