Product Description; General Information; Optional Equipment - Mennekes AMTRON Xtra User's Operation Manual

3 Product Description

3.1 General information

The MENNEKES AMTRON ®
use in private and semi-public areas, such as private land,
company car parks and depots.
The charging station is used exclusively for charging
electrically powered vehicles.
 Mode 3 charging according to IEC 61851-1:2010.
 Plugs and sockets according to IEC 62196.
The charging station is operated as a stand-alone solution or
with connection to a higher-level back-end system.
The charging station is intended solely for fixed installation.
Features:
 Status information through LED info bar.
 Integration into the home network over WLAN / LAN.
 RS485 interface for wired networking with a MENNEKES
ACU or MENNEKES E-Mobility Control Panel (SCU
mode).
 Charge APP for controlling the charging process and
displaying statistical data.
 MENNEKES HC controller, communication and control
unit.
 Multi-function button (termination of charging process,
RCCB test, re-activation of RCCBs and CBs).
 Unlocking function in case of power failure for charging
with charging plug type 2 (mode 3) (only for devices with
charging plug type 2).
 Enclosure made of AMELAN.
 Integrated cable storage.
 Wired ready for connection.
Wechs el ein- auf z weis paltig
Wallbox is a charging station for

3.2 Optional equipment

Depending on the version of the charging station, the
following optional features are available:
Connector systems
Fig. 1
Depending on the version, the charging station is equipped
one of the following connector systems:
Charging socket type 2 for use with separate charging
A
cable.
Permanently connected charging cable with charging
B
connector type 2.
Permanently connected charging cable with charging
C
connector type 1.
4