Configuration Of The Charging Station; Access Over Wlan; Access Over Lan - Mennekes AMTRON Xtra User's Operation Manual

1. Tap on "set up manually"
Fig. 13: Entering IP address, Pin and name
2. Enter the IP address and the associated PIN 1 of the
charging station and change the suggested name as
desired.
3. Confirm the entry with "Save".
 The successful set-up is confirmed with a dialogue box.

4.8 Configuration of the charging station

Functions and operating modes are configured with the
service interface in the Internet browser of the charging
station. The service interface of the charging station is
accessible over LAN or WLAN.
Requirements for Internet browsers:
 JavaScript activated
 Microsoft Internet Explorer 11 or higher
 Mozilla Firefox version 30 or higher
 Google Chrome version 35 or higher
 Opera version 20 or higher
 Current smart phone browsers (iOS, Android)

4.8.1 Access over WLAN

 In access point mode, the service interface is accessible
over http://172.31.0.1:25000.
 In a home network, the charging station receives the IP
address over the DHCP function of the customer's
Internet router. You can retrieve the IP address with the
web interface of the internet router or with an app such
as the free of charge network scanner Fing.
The address looks as follows: http://AMTRONIP:25000
(e.g. http://192.168.0.20:25000).
Access is the same as for the direct connection.

4.8.2 Access over LAN

 The charging station receives the IP address over the
DHCP function of the customer's Internet router. You
can retrieve the IP address over web interface of the
Internet router.
 If DHCP is not available, access is possible over LAN with
IP address http://192.168.0.100:25000, network mask
255.255.255.0.
 A direct cable connection without DHCP is possible.
22