Led Info Bar - Mennekes AMTRON Series Operating Manual

3.12 LED Info bar

The LED information field indicates the operating status of the device. Operational readiness, charging, wait time, and
faults are indicated by four symbols in the colours blue, green, white, and red. The MENNEKES Charge APP uses these
symbols for displaying the operating status.
LED Info bar
lit blue permanently
pulsating green
lit green permanently
lit green permanently
flashes green
flashes blue
lit red permanently or
flashing red
steady white
The colour scheme (green / blue) for "Ready for operation / charging" depends on the setting during setting-up
process.
Charge APP Description
Ready for operation
The device is ready for use. No vehicle is connected to the device.
Ready to charge: vehicle pauses
All requirements for charging an electric vehicle are met. A charging process
is not taking place. The charging process is paused due to a vehicle feed-
back or was terminated by the vehicle.
Ready to charge
All requirements for charging an electric vehicle are met. The charging pro-
cess is paused due to a missing activation signal or a charging current con-
figuration of 0 A.
animated green Charging process active
All requirements for charging an electric vehicle are met. Charging in pro-
gress.
animated green Overtemperature warning
Charging in progress. The device reduces the charging current to prevent
overheating and deactivation.
steady white Action required
Connection with vehicle is pending or has been established or charging has
been paused due to specification by the MENNEKES Charge APP. A subse-
quent action is required, such as connecting or disconnecting the charging
cable, starting the charging process by RFID card or MENNEKES Charge APP.
lit red perma- Fault
nently A fault prevents the vehicle from charging.
Î "7. Remedy"
Data processing
The device processes data.
EN
11