APRILIA TUONO V4 R 2010 Service Station Manual page 376

Table of Contents

Lock the stem in a vice without dam-

aging the surface.

Protect the bearing tube end with ad-

hesive tape.

Lubricate the sliding edges with fork oil

or sealing grease.

Fit the dust gaiter, the retainer ring and

the dust scraper on the stem.

Fit the ring, the movable bushing and,

after removing the tape, fit the fixed

Fit the sleeve on the stem and set the

oil seal into position with the aid of the

specific tool.

Specific tooling

AP8140189 Oil seal fitting tool for Ø 43 mm

(1.69 in) orifices

AP8140146 Weight

Show Quick Links

Table of Contents