APRILIA TUONO V4 R 2010 Service Station Manual page 254

Engine
•
Remove the flywheel cover.
•
Remove the circlip, thrust washer and
inner sealing ring or replace if they are
spoiled or in case of oil leaks.
See also
Removing the flywheel cover
Installing the flywheel
•
Position the flywheel on the crankshaft.
•
Block flywheel rotation using the spe-
cific tool.
•
Tighten the screw.
Specific tooling
020848Y Flywheel retainer
Flywheel cover installation
•
Insert the centring dowels in the cover.
•
Apply a layer of sealing paste along the
external edge of the cover.
•
Insert the cover together with the sta-
tor.
Recommended products
Three bond Sealing paste
-
ENG - 254
TUONO V4 R