APRILIA TUONO V4 R 2010 Service Station Manual page 106

Electrical system
TABLE B2 - RADIATOR AREA
1. Vehicle connector
2. Engine connector
3. Starter motor cable harness
CAUTION
CHECK THAT THE CONNECTORS ARE CORRECTLY IN-
SERTED AND THAT THE PURPLE SLIDE IS AT THE END
OF THE STROKE.
CAUTION
CHECK THAT THE CABLE ON THE STARTER MOTOR IS
PLACED AS INDICATED.
TABLE C - DEMAND SENSOR
1. Master Demand connector (blue)
2. Slave Demand connector (white)
CAUTION
CHECK THAT THE CONNECTORS ARE CORRECTLY INSERTED AND THAT THE PURPLE SLIDE
IS AT THE END OF THE STROKE.
CAUTION
CHECK THAT THE CABLE ON THE STARTER MOTOR IS PLACED AS INDICATED.
TABLE C1 - DEMAND SENSOR
•
Check that the connectors are inserted correctly and that the security locks are in the locked
position.
1. Slave Demand cable harness routing (creating a "U-bend" in the cable harness)
2. Master Demand cable harness routing (creating a "U-bend" in the cable harness)
3. Regulator cable harness routing
4. Fan connector
5. Clamps
ELE SYS - 106
TUONO V4 R