Concept - Valor AutoFire G4 Installation Manual

Installation Planning
Caution
This appliance may ONLY be installed
in an existing unaltered, functioning
solid-fuel burning fi replace with a
working fl ue and constructed of non-
combustible material.
DO NOT install into combustible
construction. This appliance is NOT
APPROVED for installation with a
zero clearance kit.
(sold separately)
Existing non-combustible hearth.
Combustible hearth or fl oors within
16" of insert must be a minimum 4"
(102 mm) below bottomr of insert.
Gas insert does not require a hearth.
WARNING
HOT HEARTH / FLOOR! The hearth or floor
in front of the fireplace may become very
hot when the fireplace heats. Do not
use the hearth as a seat or shelf. Solid
wood flooring in front of the fireplace (if
allowed) may shrink during the heating
season due to heat.
12
Trim
785 fi replace
Chimney Terminal Cap
Flashing
2 x 3" approved Flex Chimney
Liners running full length
Existing unaltered, functioning
solid-fuel-burning fi replace and
chimney
WARNING
Some materials or items, although safe,
may discolor, shrink, warp, crack, peel,
and so on because of the heat produced
by the fireplace. Avoid placing candles,
paintings, photos, and other items
sensitive to heat around the fireplace.

Concept