Siemens SITRANS LR460 Operating Instructions Manual page 81

Low calibration pt. (CAL LO) (3.3.3.)
Distance from Sensor Reference to Low Calibration Point (corresponding to Low Level Point).
Unit is defined in Sensor units.
Values
High calibration pt. (CAL HIGH) (3.3.4.)
Distance from Sensor Reference to High Calibration Point (corresponding to High Level Point).
Unit is defined in Sensor units.
Values
Unit (Level) (LVL UNIT) (3.3.5.)
Selected engineering units for Level (PV), referenced from Low Level Point (plus level offset,
if any).
Options
Level empty (PA); Low level point (HART) (3.3.6.)
The level when the material is at Low Calibration Point. The unit is defined in Level units.
Values
Level full (PA); High Level Point (HART) (3.3.7.)
The level when the material is at High Calibration Point. The unit is defined in Level units.
Values
Level offset (LEV OFFSET) (3.3.8.)
A constant offset that can be added to Level to form PV/SV1 (default level output). The unit is
defined in Level units.
Values
SITRANS LR460
Operating Instructions, 10/2021, A5E42035355-AB
3" HORN
4" HORN
Range: 0 to 100 m
Default: 0 m
percent linear % M, IN, CM, MM, FT, IN, M3, L, HL, IN3, FT3, YD3, GAL,
IGAL, BUSH, BBL, BBL (LIQ)
default: %
Range: -999999 to 999999 %
Default: 0 m
Range: -999999 to 999999 %
Default: 100 m
Range: -999999 to 999999 %
Default: 0 m
default: 70 m (229.7 ft)
default: 100 m (328.1 ft)
Parameter assignment
8.5 Input (3.)
81