Return Procedure; Disposal - Siemens SITRANS LR460 Operating Instructions Manual

Service and maintenance

9.3 Return procedure

Cleaning the enclosure
• Clean the outside of the enclosure with the inscriptions and the display window using a
cloth moistened with water or a mild detergent.
• Do not use any aggressive cleansing agents or solvents, e.g. acetone. Plastic parts or the
painted surface could be damaged. The inscriptions could become unreadable.
9.3 Return procedure
To return a product to Siemens, see Returns to Siemens
siemens).
Contact your Siemens representative to clarify if a product is repairable, and how to return it.
They can also help with quick repair processing, a repair cost estimate, or a repair
report/cause of failure report.
NOTICE
Decontamination
The product may have to be decontaminated before it is returned. Your Siemens contact
person will let you know for which products this is required.
9.4

Disposal

120
Devices described in this manual should be recycled. They may not be
disposed of in the municipal waste disposal services according to the Di-
rective 2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC and UK, or to a local-
ly approved disposal service for eco-friendly recycling. Observe the specific
regulations valid in your country.
Further information about devices containing batteries can be found at:
https://support.industry.siemens.com/cs/document/109479891/
(https://support.industry.siemens.com/cs/document/109479891/)
(www.siemens.com/returns-to-
Operating Instructions, 10/2021, A5E42035355-AB
SITRANS LR460