Simulation - Siemens SITRANS LR460 Operating Instructions Manual

Note
The following dialog boxes appear as they would using a PROFIBUS PA device. Screens may
appear slightly different when using a HART device.
7.10

Simulation

Note
The Simulation parameter influences output to the control system.
Simulate analog input to AIFB1 or AIFB2
Simulation (Measured Value)
Allows you to input a simulated value in order to test the functioning of the Analog Input
Function Blocks.
1. Open the menu Device – Simulation, and select the desired function block.
2. From the Simulation (Measured Value) tab, enable simulation, enter a value, and click
Transfer.
3. After simulation is complete, disable simulation.
SITRANS LR460
Operating Instructions, 10/2021, A5E42035355-AB
Remote operation
7.10 Simulation
65