Start-Up - Thermo Scientific 3962 Operating Manual

| Operation
Chapter 6
|
6-2 Model 3962

Start-Up

With the environmental chamber properly installed and connected to power, system
setpoints can be entered. The following setpoints can be entered in Set Mode:
Temperature and Overtemperature. To enter Set Mode, press the Mode key until the Set
indicator lights. Press the right and/or left arrow keys until the proper parameter appears
in the message display center. See Figure 7-3 on page 4 for more detail.
It is the responsibility of the user to validate the proper operation of each
environmental chamber in their specific application(s) with respect to unit
location, operating environment, and settings.
Thermo Scientific