Table of Contents
Advertisement
USER CONTROLS PANEL
Input Select
INPUT
POWER
Power Light Indicator
USER CONTROLS:
The On Screen Manager (OSD EasyMenu) controls are located under the metal hatch on the left front
side of the monitor. To begin adjusting any of the monitor's functions, press then desired function item, and
then refer to the table below to make any changes to the picture. Below follows a rough guide to what
these user controls buttons stand for.
INPUT SELECT:
This CRT monitor have two input terminals in the back. This will let the user to connect two computers
simultaneously. The user may select any of the inputs to display by pressing the "Input Select" button.
POWER LED ADJUST / INDICATOR:
The user can adjust the intensity of the "Power Light Indicator" by using a screwdriver and gently turn the
screw inside the "Power Led Adjust" hole.
SELECT FUNCTIONS BUTTONS / ADJUST BUTTONS:
Any picture adjustments can be viewed or modified by pressing any of these buttons. This will bring up an
EasyMenu showing it's function. Every function can be adjusted using the "Adjust Buttons" to either
increase or decrease the values.
The EasyMenu will be visible for 6 seconds before it automatically disappears. Pressing the same
button will also close the EasyMenu. When any of the "Adjust Buttons" are pressed, a purple color
will indicate that the selected function is active and are now beeing modified. A slider will also
indicate the adjustment.
AUTO DEGAUSS / DEGAUSS:
To manually degauss the picture press this button. This function will remove any color impuritites that may
be visible in the picture. This function is also available as a hot-key beside the "CONT" and "BRIGHT"
adjustment knobs on the right front side of the monitor.
The AUTO DEGAUSS adjustment knob can be adjusted or turned beyond the "30" mark. This will
deactivate (OFF) the auto degauss function. The manual degauss function will however be available.
Select Function Buttons
R
G
B
LANGUAGE
RECALL
Adjust Buttons
Power Led Adjust Auto Degauss Adjust
V
H
MOIRE
Degauss Button
4
Product: JH 21C06
POWER LED
MIN.
ADJUST
1
DEGAUSS
AUTO DEGAUSS
Product: JH 21C06
30
OFF
Advertisement
Table of Contents
