Appendix - JAI GO-5000M-PGE-UV User Manual

Cmos digital progressive scan monochrome uv camera with gige interface
Hide thumbs Also See for GO-5000M-PGE-UV:
Table of Contents

Advertisement

GO-5000M-PGE-UV User Manual (Ver. 1.2)

Appendix

Precautions
Personnel not trained in dealing with similar electronic devices should not service this camera.
l
The camera contains components sensitive to electrostatic discharge. The handling of these
l
devices should follow the requirements of electrostatic sensitive components.
Do not attempt to disassemble this camera.
l
Do not expose this camera to rain or moisture.
l
Do not face this camera towards the sun, extreme bright light or light reflecting objects.
l
When this camera is not in use, put the supplied lens cap on the lens mount.
l
Handle this camera with the maximum care.
l
Operate this camera only from the type of power source indicated on the camera.
l
Power off the camera during any modification such as changes of jumper and switch setting.
l
Typical Sensor Characteristics
The following effects may be observed on the video monitor screen. They do not indicate any fault of
the camera but are associated with typical sensor characteristics.
V. Aliasing
l
When the CMOS camera captures stripes, straight lines or similar sharp patterns, jagged edges
may appear on the monitor.
Blemishes
l
All cameras are shipped without visible image sensor blemishes.
Over time some pixel defects can occur. This does not have a practical effect on the operation of
the camera. These will show up as white spots (blemishes).
Exposure to cosmic rays can cause blemishes to appear on the image sensor. Please take care
to avoid exposure to cosmic rays during transportation and storage. It is recommended using
sea shipment instead of air flight in order to limit the influence of cosmic rays on the camera.
Pixel defects/blemishes also may emerge due to prolonged operation at elevated ambient
temperature, due to high gain setting, or during long time exposure. It is therefore recommended
to operate the camera within its specifications.
Patterned Noise
l
When the sensor captures a dark object at high temperature or is used for long time integration,
fixed pattern noise may appear on the video monitor screen.
- 90 -
Miscellaneous

Advertisement

Table of Contents
loading

Table of Contents