JAI GO-5000M-PGE-UV User Manual page 62

GO-5000M-PGE-UV User Manual (Ver. 1.2)
Trigger Source
The following signals can be used as the trigger source signal.
Trigger Source
Item
Low Connect LOW level signal to the selected trigger operation (Default setting)
High Connect HIGH level signal to the selected trigger operation
Connect Soft Trigger signal to the selected trigger operation. Trigger can be input manually
Soft Trigger by the execution of the software trigger. Trigger software is available on each trigger
source.
PulseGenerator0 Connect Pulse generator 0 signal to the selected trigger operation
User output 0 Connect User output 0 signal to the selected trigger operation
User output 1 Connect User output 1 signal to the selected trigger operation
Line 5 - OPT IN 1 Connect OPT IN 1 signal to the selected trigger operation
NAND 0 Out Connect NAND 0 OUT signal to the selected trigger operation
NAND 1 Out Connect NAND1 OUT signal to the selected trigger operation
Action 1 Connect Action 1 OUT signal to the selected trigger operation
Action 2 Connect Action 2 OUT signal to the selected trigger operation
Description
- 62 -
Main Functions