JAI GO-5000M-PGE-UV User Manual page 39

GO-5000M-PGE-UV User Manual (Ver. 1.2)
Pulse Generator Clear Source
The following clear source can be selected as the pulse generator clear signal.
Pulse Generator
Clear Source Item
Low
High
Frame Trigger Wait
Frame Active
Exposure Active
FVAL
LVAL
Action 0 Out
Action 1 Out
User 0 Out
User 1 Out
Line 5 Opt 1 In
Nand0 Out
Nand1 Out
Pulse Generator Inverter
Clear Source Signal can have polarity inverted.
Pulse Generator Setting table
Display Name
Clock Pre-scaler
Pulse Generator Clock (MHZ)
Pulse Generator Selector
- Pulse Generator Length
- Pulse Generator Length (ms)
- Pulse Generator Frequency (Hz)
- Pulse Generator Start Point
- Pulse Generator Start Point (ms)
- Pulse Generator End Point
- Pulse Generator End Point (ms)
- Pulse Generator pulse-width (ms)
- Pulse Generator Repeat Count
Connect Low level signal to Clear Source for the pulse generator. Default setting
Connect High level signal to Clear Source for the pulse generator.
Connect Frame Trigger Wait signal to Clear Source for the pulse generator.
Connect Frame Active signal to Clear Source for the pulse generator.
Connect Exposure Active signal to Clear Source for the pulse generator.
Connect FVAL signal to Clear Source for the pulse generator.
Connect LVAL signal to Clear Source for the pulse generator.
Connect Action 0 output signal to Clear Source for the pulse generator.
Connect Action 1 output signal to Clear Source for the pulse generator.
Connect User 0 output signal to Clear Source for the pulse generator.
Connect User1 output signal to Clear Source for the pulse generator.
Connect Opt 1 In signal to Clear Source for the pulse generator.
Connect NAND 0 output signal to Clear Source for the pulse generator.
Connect NAND 1 output signal to Clear Source for the pulse generator.
1 to 4096
[Pixel Clock:48 MHz]÷[Clock Pre-scaler]
- Pulse Generator 0
1 to 1048575
([Clock Source]÷[Clock Pre-scaler])
[ Pulse Generator Length (ms)]
0 to 1048574
([Clock Source]÷[Clock Pre-scaler])
1 to 1048575
([Clock Source]÷[Clock Pre-scaler])
[ Pulse Generator End Point (ms)] - [ Pulse Generator Start Point (ms)]
0 to 255
Description
Value
-1
x [Pulse Generator Length]
-1
-1
x [Pulse Generator Start Point]
-1
x [Pulse Generator End Point]
- 39 -
Main Functions