JAI GO-5000M-PGE-UV User Manual page 31

Cmos digital progressive scan monochrome uv camera with gige interface

Hide thumbs Also See for GO-5000M-PGE-UV:

Table of Contents

GO-5000M-PGE-UV User Manual (Ver. 1.2)

ActionGroupMask

Sets the mask value for the selected action signal in a 32-bit register. This value is compared against

the group mask value of the ACTION_CMD message to determine if the message should be ignored

or acted upon. A logical AND operation is used and must produce a non-zero result or else the

message is ignored.

ActionGroupKey

Sets the group key value for the selected action signal in a 32-bit register. This value must match the

group_key value of the ACTION_CMD message in order for the message to be acted upon.

GPIO

This is a general interface for input and output and controls input and output for trigger signals or valid

signals and pulse generator. By using this interface, you can control an external light source, make a

delayed function to input a trigger signal or make a precise exposure control with PWC trigger.

Basic Block Diagram

- 31 -

Main Functions

Table of Contents