JAI GO-5000M-PGE-UV User Manual page 79

GO-5000M-PGE-UV User Manual (Ver. 1.2)
Gain Raw
The range for adjustment: Gain Raw Digital All: 100 ~ 1600 (0dB ~ 24dB)
Gain Auto
This provides automatic control of the gain level. This is controlled by the command JAI ALC
Reference.
OFF: Adjust manually.
l
Once: Operate only one time when this command is set
l
Continuous: Operate the auto gain continuously
l
The following detailed settings are also available.
ALC Speed: The rate of adjustment of GainAuto can be set (common with Exposure Auto)
l
Gain Auto Max: The maximum value of GainAuto control range can be set
l
Gain Auto Min: The minimum value of GainAuto control range can be set
l
ALC Reference: The reference level of Gain Auto control can be set (common with Exposure
l
Auto)
ALC Area Selector: The portion of the image used for auto gain control can be set (common with
l
Exposure Auto)
ALC Area Enable: This command can make selected area(s) disabled or enabled. If ALC Area
l
Selector selects ALC Area Enable ALL, and it is set to True, all areas are enabled, and in this
case, preset areas are all disabled.
ALC Channel Area
- 79 -
Main Functions