B5-440-36 / B5-440-48 / B5-540-48XL / BF-030-48
REPAIR/PROGRAMMING
WARNING
This section is one section of a complete service
manual. Before starting any procedure, read all
warnings and instructions that are located in the
Service Guidelines chapter.
Repairs
There are no internally serviceable components in the motor speed controllers. If a controller is faulty then it must
be replaced.
Note: Opening or disassembling a controller will void the controller warranty.
Programming
Must refer to supplementary instructions that were included with Sevcon Gen4™ AC Handsets before attempting
to program any settings.
MB-440-06
Program Connector is located under the rear deckboard on the
Motor Speed Control Panel
Motor Controller
HARDWARE TORQUE
If hardware is not listed here, refer to standard torque
values in the appendix.
Description
Terminal stud
Inch Pounds
Newton Meters
59
7
Page 89