Taylor-Dunn B5-540-48XL Service And Replacement Parts Manual page 18

Tool List
TOOL LIST
The tools shown here are generic for servicing Taylor-Dunn vehicles. Not all tools will be required for servicing this
vehicle.
62-027-00: Test Light
Used for testing electrical circuits. Switchable
for 12, 24, 36, 48 volt systems.
Required to complete troubleshooting
provided in the vehicle service manuals.
Sevcon AC System Handset.
62-027-69 (adjust)
62-027-70 (User
Diagnostics and adjustments of the
Sevcon AC control system.
Controller Programming:
Sevcon: 62-027-63 "PCpaK Cable lead and
application."
Delta-Q Charger PC Interface
62-027-47
Page 18
62-027-32: Throttle Module Analyzer
Tests the throttle module in or out of the
vehicle
70-440-55: Pin Removing Tool
Removes pin from Amp circular harness
connectors.
Molex # 11-300-06: Pin Removing Tool
Removes 0.093 diameter pins from Molex
rectangular harness connectors. Not
available from Taylor-Dunn. Purchase from
any local electronics distributor.
B5-440-36 / B5-440-48 / B5-540-48XL / BF-030-48
75-089-00: Throttle Module Test Harness
Used in conjunction with a volt meter to test
the throttle module. The module must be
installed in a working control system.
Note: P a r t # 6 2 - 0 2 7 - 3 1
includes instructions.
Molex # 11-300-02: Pin Removing Tool
Removes 0.062 diameter pins from Molex
rectangular harness connectors. Not
available from Taylor-Dunn. Purchase from
any local electronics distributor.
75-442-55: Pin Removing Tool
Removes pins from Molex Mini-Fit harness
connectors.
MB-440-06