ASDA-A3
When the drive connects to an inductive load, you must install the diode (permissible current:
below 40 mA; surge current: below 100 mA; maximum voltage: 30V).
C5: DO wiring - the servo drive uses an external power supply and the resistor is for general
load.
C6: DO wiring - the servo drive uses an external power supply and the resistor is for inductive
load.
polarity of diode is
Servo drive
correct, or it may
damage the servo
DOX+
DOX-
DC
Make sure the
drive.
24 V
DC
Wiring
3
3-33