Advertisement
Harmony Series H1 Cylindrical Lock
Parts Breakdown
5
Lever Hand Reverse Door
Prior to installation, please confirm receipt of all parts.
Tools Required:
• #2 Phillips screwdriver
• Push pin (provided)
• 3/32" drill bit
• 5/32" drill bit
• 5/16" drill bit
• 3/8" drill bit
• 7/16" drill bit
• 1" bore
• 1-1/2" bore
• 2-1/8" bore
A7884E • 800-810-WIRE (9473) • www.sargentlock.com
10*
16
*If you are replacing iCLASS-only product:
•
Replace both reader & controller with SE products
Consult factory for details
If you are replacing an iCLASS SE product:
•
Reader or controller can be ordered separately
6
*Adapter Plate is only
shipped with orders that
specify 1-3/8" doors.
Advertisement
