Characteristics - Epever Tracer6210AN User Manual


Up to 6 controllers connection in parallel to expand the system

Load dry contact to control the external load switch

To set the first and the second disconnection voltage of load by the software

Auto-control of utility and generator dry contact design to compose a hybrid power system easily

Remote temperature and voltage sensor design to collect more accurate battery
temperature/terminal voltage and eliminate the battery cables' voltage drop

Isolated RS485 communication ports (Modbus protocol)

5V/200mA RS485 communication ports with short circuit protection

Support remote monitoring and parameters setting via the APP or PC software
★
The parameters are measured in the Tracer10415AN@48V system.

1.2 Characteristics

❶ Charging indicator
❷ SELECT button
❸ External fuse
❹ Grounding terminal
❺ Screw hole(M4)
❻ (PV reverse polarity) alarm indicator
Figure 1 Product Characteristics
❿ (Utility/Generator) dry contact ON interface
⓫ RBVS interface
⓬ (Load) dry contact interface
⓭
interface
⓮ PV terminals
⓯ Battery terminals
3
(4)
(Utility/Generator) dry
(6)
(6)
(5)
contact OFF