Table of Contents
Advertisement
2 General
2.1 Information about this manual
The Operating Manual shall enable the user to properly install the pyrometer and
the required accessories.
Before starting installation, be sure to read and understand this entire manual,
in particular the chapter on safety! The instructions contained in this manual,
especially those concerning safety, as well as site specific regulations governing
UV radiation must be complied with at all times. It is imperative to comply with
the safety instructions and the accident protection regulations valid for the area of
application.
2.2 Explanation of symbols
Important safety-related references in this manual are marked with a symbol.
ATTENTION
This symbol points out guidelines. If you do not observe them, the device might
be damaged, malfunctioning or even fail to operate.
CAUTION
This symbol points out hints and information which should be heeded for
efficient and trouble-free operation
►
Action
This symbol instructs the operator to take action.
>
Reaction, Result
This symbol indicates the result of the action taken.
2.3 Liability and Warranty
All information compiled in this manual is in accordance with applicable regula-
tions. The statements made are based on state-of-the-art technology and reflect
our extensive knowledge and many years of experience.
Always carefully read this Operating Manual before beginning any work
on or with the instrument, especially prior to installation and initial setup!
The Manufacturer shall not be held liable for any damages or malfunctions
arising from a disregard of the warnings and instructions contained herein.
Operating instructions
Advertisement
Table of Contents
