Installation Of The Shifting Lever - Shimano Alfine S7000 Series Dealer's Manual

INSTALLATION

Installation of the shifting lever

„ Installation of the shifting lever
1
2
(A)
„ Installation of the shifting cable
For internal 8-speed
Shifting lever side
1
To be continued on next page
Mount the shifting lever to the
handlebar.
(z)
Φ22.2
(z)
Mount the grip to the handlebar and
secure the shifting lever.
Set the shifting lever to 8 .
18
NOTE
Use a handlebar with an outer diameter of
Φ22.2 mm.
(A)
4mm hexagon wrench
Tightening torque
5 - 7 N·m
NOTE
Use a handlebar grip with a maximum outer
diameter of Φ32 mm.
NOTE
•
Use a shifting cable with one inner cable
drum.
Cable with one inner cable drum: SIS-SP41/
SP40
(Φ4mm)
•
Make sure that the shield cap is at the
shifting lever end.