Factory Default Settings - CyberData InformaCast 011396 Operation Manual

2.3 Configure the InformaCast Enabled Speaker with
Talk-Back Parameters
To configure the InformaCast Enabled Speaker with Talk-Back online, use a standard web browser.
Configure each InformaCast Enabled Speaker with Talk-Back and verify its operation before you
mount it. When you are ready to mount an InformaCast Enabled Speaker with Talk-Back, refer to
Appendix A, "Mounting the Speaker"

2.3.1 Factory Default Settings

All InformaCast Enabled Speakers with Talk-Back are initially configured with the following default IP
settings:
When configuring more than one InformaCast Enabled Speaker with Talk-Back, attach the
InformaCast Enabled Speakers with Talk-Back to the network and configure one at a time to avoid IP
address conflicts.
Parameter
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
a. Default if there is not a DHCP server present.
Operations Guide
Table 2-3. Factory Default Settings
a
a
a
932010A
Installing the InformaCast Enabled Speaker with Talk-Back
for instructions.
Factory Default Setting
DHCP
192.168.1.23
admin
admin
255.255.255.0
192.168.1.1
Device Configuration
CyberData Corporation
19