CyberData InformaCast 011396 Operation Manual page 85

Table 2-16. Autoprovisioning Configuration Parameters (continued)
Web Page Item
Autoprovisioning log
2.3.14.1 Autoprovisioning
On boot, the device will look for an autoprovisioning server configured on the
or specified as a DHCP option. When it finds a server, it will try to download the following (in order of
preference):
1. The file configured on the autoprovisioning page.
2. A file named according to it's mac address (for example: 0020f7350058.xml).
3. The file 000000cd.xml
The file can be hosted using a standard web server (like apache, IIS, or nginx), and the device can
download over SSL. The file server can be an ipv4 address in dotted decimal notation or a fully
qualified domain name.
By default, the device will get its autoprovisioning server from the DHCP options. See
2.3.14.2, "Sample dhcpd.conf"
server addresses. If multiple options are set, the device will attempt to download autoprovisioning
files from every server.
The DHCP option determines the protocol used to download the autoprovisioning file. The device
looks for DHCP options in the following order:
1. Option 43 - a FQDN or an IP address to an http server
2. Option 72 - an IP address to an http server
3. Option 150 - an IP address to a tftp server
4. Option 66 - an IP address to a tftp server or if the entry starts with 'http', a FQDN to a http server.
You can download an autoprovisioning template file from the
Download Template button (see
be set on the board.
Autoprovisioning files can contain the whole configuration or a subset of this file. The first
autoprovisioning file can also contain links to other autoprovisioning files.
The <MiscSettings> section contains some examples of additional autoprovisioning files:
<!--
<!--
<!--
<!--
Operations Guide
Press the Download Template button to create an autoprovisioning file for the
device. See
The autoprovisioning log provides information about the latest autoprovisioning
attempt (i.e. dhcp options and server accessed and files parsed or not found).
<MiscSettings>
<DeviceName>CyberData Device</DeviceName>
<AutoprovFile>common.xml</AutoprovFile>-->
<AutoprovFile>sip_reg[macaddress].xml</AutoprovFile>-->
<AutoprovFile>audio[macaddress]</AutoprovFile>-->
<AutoprovFile>device[macaddress].xml</AutoprovFile>-->
</MiscSettings>
Installing the InformaCast Enabled Speaker with Talk-Back
Description
Section 2.3.14.3, "Download Template Button"
for an example of how to configure dhcpd to offer autoprovisioning
Table 2-16). This file contains every configuration option that can
932010A
Device Configuration
Autoprovisioning Page
Autoprovisioning Page using the
CyberData Corporation
78
Section