Table of Contents
Advertisement
To read data from the dosimeter's memory turn on the dosimeter's control unit.
Select "Data - Read" menu option in the program and place USB/IrDA adapter to the
infrared port of the control unit (Figure 2.39 of this OM). The status bar displays the
reading process. Upon reading completion there will be a message "Read completed"
and the program's main field will display the read data.
If during reading you select "Clear dosimeter data", the data in the device will
be cleared after reading. In this case you can also synchronize the dosimeter's time
with the time set on the PC with the "Synchronize time with PC" option.
Data display
Read or downloaded data is displayed in the program's main field. Data can be
presented as points on the map or as a table. Set the display options when selecting
"Map" or "Table" tab respectively.
Map
Points on the map are shown with reference to the location coordinates. Popup
information windows with detailed information on the point are allocated to each
point.
You may also choose the source of mapping information. This allows you to
choose the type of the map that is best suited for a particular area.
Figure 2.46 – Data display on the map
86
Advertisement
Table of Contents
