ECOTEST MKS-UM Operating Manual page 84

2.3.6.12.4.6 A continuous green glow of the POWER LED means the
USB/IrDA adapter is ready to operation.
2.3.6.12.4.7 Select either on the PC Start/Settings/Control Panel/System or
press the key "Pause/Break" on the keyboard holding down the "Windows" key -
"System Properties" window opens. In this window, switch to the "Hardware" tab
and click the "Device Manager" button. In the "Device Manager" window, choose
the configuration "Ports (COM and LPT)" and remember the COM port number,
which the operating system designated for the USB/IrDA adapter, for instance, USB
Serial Port (COM 4) depending on the installed drivers.
2.3.6.12.4.8 Enter the COM port number, which the operating system
designated for the USB/IrDA adapter, in the program, which will be used with that
unit.
2.3.6.12.4.9 Exchange data between the dosimeter and the PC through the
use of the USB/IrDA adapter. While the USB/IrDA adapter sends or receives data
the yellow DATA LED is blinking.
2.3.6.13 MKS-UM EventReader 1.0 custom-made software
2.3.6.13.1 MKS-UM EventReader 1.0 custom-made software is designed to
process measurement results that have been saved in the nonvolatile memory of the
control unit on the PC running Windows 7 and 8.1. Data from the control unit is
transferred to the PC using the USB/IrDA adapter.
2.3.6.13.2 EventReader 1.0 features
EventReader 1.0 makes it possible to:
- read up to 1500 measurement results from the nonvolatile memory of the
control unit;
- display data on the map with reference to the location coordinates;
- display data in a tabular view;
- save the read data in the PC's memory as a binary file, as a .csv file or as a
report;
- printout the reports;
- view data saved as a binary file.
82