ECOTEST MKS-UM Operating Manual page 35

2.2.5.3 Lay the probe's spiral cable in the holder.
Figure 2.7 – Laying the probe's spiral cable in the holder
2.2.5.4 Screw the telescopic tube on the BG probe's holder (Figure 2.8). If
necessary, use the screwdriver from the delivery kit.
2.2.5.5 Connect one of the connectors of the probe's spiral cable to P
connector of the control unit, and the other one - to BG probe's connector.
2.2.6 Connecting ABG probe
2.2.6.1 Set the required length of the telescopic tube and attach or detach the
armrest according to 2.2.4.1, 2.2.4.2 of this operating manual.
2.2.6.2 Lay the probe's spiral cable in the holder according to 2.2.4.3 of this
OM.
2.2.6.3 Screw the telescopic tube on the ABG probe's holder (Figure 2.9)
Figure 2.8 – Fixing telescopic tube to BG probe
33