ECOTEST MKS-UM Operating Manual page 34

2.2.5 Connecting BG probe
2.2.5.1 Set the required length of the telescopic tube. To do this, set the length
of each of three segments of the tube (Figure 2.4):
1 - release the twist lock by turning it in the direction shown below;
2 - set the required length of the tube segment;
3 - fasten the lock by turning it in the opposite direction.
Figure 2.4 – Setting the required length of the telescopic tube
2.2.5.2 Attach (or detach) the armrest to (from) the telescopic tube (Figures 2.5,
2.6).
Figure 2.5 – Attaching the armrest to the telescopic tube
Figure 2.6 – Detaching the armrest from the telescopic tube
32