ECOTEST MKS-UM Operating Manual page 81

2.3.6.10.4 Transfer of measurement results from the nonvolatile memory
of the control unit to the PC
2.3.6.10.4.1 To transfer the results do the following:
- switch on the control unit;
- run the custom-made software on the PC;
- place the control unit so that its infrared port is opposite to the PC's
USB/IrDA adapter at a distance of 5 to 30 cm (Figure 2.39).
- enable communication function of the software according to its Manual. No
additional actions are required from the control unit.
Figure 2.39 – Location of the control unit and the PC's USB/IrDA adapter to
transfer measurement results to the PC
79