Table of Contents
Advertisement
From the mode of archive viewing the control unit goes back to the mode of
measurement results display obtained from the probes or detectors.
If the nonvolatile memory contains no saved measurement results, after
pressing MODE the dosimeter immediately returns from the current time display
mode to the mode of measurement results display obtained from the probes and
detectors.
2.3.5.3 Each of the operating modes has its submodes.
The mode of measurement results display obtained from the probes or
detectors has the following submodes:
- viewing and programming of new values of the alarm threshold and specified
limits of statistical deviations (specified limits of the expected relative statistical
deviations of the measurement result given 0.95 confidence probability).
- measurement result saving in the nonvolatile memory;
The mode of accumulated DE and DE accumulation time display has the
following submodes:
- viewing and programming of a new value of the alarm threshold level;
- accumulated DE and DE accumulation time values reset.
The mode of navigation receiver control has the following submodes:
-viewing and programming of the new local time offset relative to GMT.
The mode of current time and date display has the submodes of time
and date setting.
The mode of measurements results viewing stored in the nonvolatile memory
has the submode that clears measurement results.
2.3.6 Operating procedure
2.3.6.1 Switching the dosimeter on/off
2.3.6.1.1 Press ON/SAVE and hold it down for 4 s to switch the dosimeter
on. Display and alarm tools (LCD, LEDs and buzzer) testing (for about 6 s) means
that the dosimeter switches on. Upon completion of testing, the dosimeter starts
photon-ionizing radiation DE measurement and switches to the measurement results
display obtained from the probes or detectors.
Note. If the battery was removed from the dosimeter, it switches to the mode
of time and date setting upon completion of display and alarm tools testing.
2.3.6.1.2 To switch the dosimeter off, press and hold ON/SAVE for 4 s.
42
Advertisement
Table of Contents
