ECOTEST MKS-UM Operating Manual page 83

2.3.6.12 USB/IrDA adapter
2.3.6.12.1 USB/IrDA adapter is designed to communicate information from
the nonvolatile memory of the dosimeter to the PC.
2.3.6.12.2 USB/IrDA adapter is connected to the USB-port of the PC and
operates in the mode of virtual COM-port.
2.3.6.12.3 USB/IrDA adapter operates under the following conditions:
- ambient air temperature from +5 to +50
- relative humidity up to 80 % at 35
- atmospheric pressure from 84 to 106.7 kPa according to GOST 12997-84
standard.
Ingress protection rating of USB/IrDA adapter is IP40 according to DSTU
ЕN 60529:2018 standard.
2.3.6.12.4 Guidelines on switching on, drivers' installation and testing the
USB/IrDA adapter
2.3.6.12.4.1 Unpack USB/IrDA adapter.
2.3.6.12.4.2 Turn on the PC, wait until operating system is ready and insert a
mini-CD with the USB/IrDA adapter drivers into the CD-drive of the PC.
2.3.6.12.4.3 Connect USB/IrDA adapter to USB-port of the PC.
2.3.6.12.4.4 The operating system displays a message - "Found New
hardware" and opens a window "New Hardware Wizard". The operating system
suggests connecting to the Windows Update to search for the software. Here you
need to choose "No, not this time" and click "Next". A new window "New Hardware
Wizard" opens, which helps the operating system to install the software for this unit.
Here you should select "Automatic installation (recommended)" and click "Next".
While drivers are being installed, a window "Hardware installation" opens, in which
the system warns that the software has not been tested for compatibility with the
operating system, and you should click "Continue anyway".
2.3.6.12.4.5 The operating system searches for the drivers on the mini-CD
and installs them. Drivers' files will be saved by the operating system, so there is no
need to re-install them each time you use the USB/IrDA adapter on the chosen PC.
о
С;
о
С temperature, non-condensing;
81