Connector
Fan Power Connector: FAN0 ~ FAN7
The fan power connectors support system coolng fan wth +12V. When con-
nectng the wre to the connectors, always note that the red wre s the postve
and should be connected to the +12V; the black wre s Ground and should be
connected to GND. If the manboard has a System Hardware Montor chpset
onboard, you must use a specally desgned fan wth speed sensor to take advan-
tage of the CPU fan control.
Important
•
Please refer to the recommended CPU fans at processor's official website or
consult the vendors for proper CPU cooling fan.
•
Fan cooler sets with 3- or 4-pin power connector are both available.
MS-S0081
MS-S0081
2-15