Removing From The Terminal; Connecting The Power Cable - Symbol PPT 8800 Series Product Reference Manual

2. Insert the terminal into the cable cup.
3. Press down on the two locking tabs.
4. Pull on the cable cup to ensure that it is securely seated on the terminal.

Removing from the Terminal

1. Lift the two locking tabs.
2. Pull the cable cup from the terminal.

Connecting the Power Cable

1. Open the rubber cap covering the power port.
Figure 1-28. Connecting Power Connector to Cable Cup
2. Plug the power connector into the power port.
3. Wrap the cable around the cable support.
4. Connect the other end of the cable to the appropriate power source.
Rubber
Cap
Cable
Support
Getting Started
Back of
Cable Cup
1-25