Parameter Menus; Set Parameter Defaults; Terminal Selection - Symbol LS 1006 Product Reference Manual

LS 1006 Product Reference Guide

Parameter Menus

Refer to the Default table in the front of this chapter for the default settings for each
parameter type.

Set Parameter Defaults

Scanning the SET ALL DEFAULTS bar code returns all parameters to the default values listed
in the Default Table.

Terminal Selection

Scan the appropriate bar code associated with your terminal type.
4-8
Set All Defaults
IBM PC/AT IBM PS/2-50, 55SX,
60, 70, 80
IBM PC/XT
IBM PS/2-30