Editing A Profile; Creating A New Profile; Deleting A Profile; Ordering Profiles - Symbol PPT 8800 Series Product Reference Manual

®
PPT 8800 Series Product Reference Guide for Embedded Windows CE .NET
environments. When the WLAN Profiles initially displays, existing profiles appear in the
WLAN Profiles list.
Figure 6-16. Mobile Companion - WLAN Profiles
Select a profile from the list and tap Connect to set that profile as the active profile. The
active profile displays the transmit and receive icon to the left. Once selected, the terminal
is using the ESSID, encryption and power consumption settings initially configured for that
profile.

Editing a Profile

Select a profile from the list and tap Edit to display the Mode tab where the ESSID and
operating mode can be changed for the profile. Use the Encryption, IP Config, and Power
tabs as necessary to edit the profile power consumption and security parameters.

Creating a New Profile

Tap New to display the Mode tab wherein the profile name and ESSID can be set. Use the
Encryption, IP Config and Power tabs as required to set security, network address
information and power consumption level for the new profile.

Deleting a Profile

Select a profile to delete from the list and tap Delete to remove the selected profile.

Ordering Profiles

Select a profile from the list and tap Move Up or Move Down to order the profile. If the
current profile association is lost, Mobile Companion attempts to associate with the first
profile in the list and then the next until a new association is achieved.
6-20