Cleaning The Cradle Connector - Symbol PPT 8800 Series Product Reference Manual

Cleaning the Cradle Connector

To clean the cradle connector, follow the steps below.
1. Remove the power to the cradle by unplugging the DC cable.
2. Position the cradle as shown in
3. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
4. Scrub the cotton portion of the cotton tipped applicator along the pins as shown in
Figure 11-5, slowly moving back-and-forth from one side of the connector to the
other.
Figure 11-4. Preparing the Cradle
Figure 11-5. Cleaning the Cradle Connector Pins
Maintenance and Troubleshooting
Figure 11-4.
11-7