Network Address Translation (Napt) - Symbol PPT 8800 Series Product Reference Manual

Enter the new internet gateway IP address at the prompt.
e. Select 5 to access the first set the DNS IP addresses prompt.
Enter the first new DNS IP address at the prompt.
f. Select 6 to access the second set the DNS IP addresses prompt.
Enter the second new DNS IP address at the prompt.
g. Select 7 to access the set the first WINS IP addresses prompt. This is required
for ActiveSync to function properly.
Enter the first new WINS IP address at the prompt.
h. Select 8 to access the set the second WINS IP addresses prompt.
Enter the second new WINS IP address at the prompt.
i. Select 9 to access the set the correct subnet mask IP addresses prompt.
Enter the new subnet mask IP address at the prompt.
j. Select A to access the Terminal 1 IP addresses prompt.
Enter the new Terminal 1, IP address at the prompt.
k. Select B to access the Terminal 2 IP addresses prompt.
Enter the new Terminal 2, IP address at the prompt.
l. Select C to access the Terminal 3 IP addresses prompt.
Enter the new Terminal 3, IP address at the prompt.
m. Select D to access the Terminal 4 IP addresses prompt.
Enter the new Terminal 4, IP address at the prompt.
4. Select Q to return to the main Cradle Utilities menu.
5. Select F to reset cradle and write values to flash memory.

Network Address Translation (NAPT)

When Network Address Translation (NAPT) is enabled in both DHCP and Static mode, the
cradle assigns private IP addresses to each terminal and performs Network Address
Translation (NAPT) on all TCP/IP and UDP/IP packets as they transmit through the cradle
between the outside network and the cradle's private network. The terminals are assigned
private addresses specified in options A through E in the Public network setting menu.
Communications
4-27