Symbol PPT 8800 Series Product Reference Manual page 299

9. If grease and other dirt is found on other areas of the cradle, use a lint free cloth
and alcohol to remove.
10. Allow at least 10-30 minutes (depending on ambient temperature/humidity) for the
alcohol to air dry before apply power to cradle.
Note: If temperature is low and humidity is high, longer drying time is
needed. Warm and dry requires less drying time. DO NOT PLACE
PRODUCTS IN AN OVEN OR UNDER HEAT LAMPS!
Avoid exposing this product to contact with hot oil or other
flammable liquids. If such exposure occurs, unplug the unit
and clean the product immediately in accordance with
these guidelines.
Maintenance and Troubleshooting
W
ARNING
11-9