Configuration Of The Terminal - Symbol PPT 8800 Series Product Reference Manual

PPT 8800 Series Product Reference Guide for Embedded Windows
You may have other options selected, for example, Allow serial cable or infrared
connection to this COM port.
d. Click OK.
Note: Before communicating through an ethernet connection, you must
create a partnership between your terminal and your host computer.
See Setting up a Partnership on page 4-4 for detailed instructions.

Configuration of the Terminal

When you insert a terminal into the cradle, the cradle provides a direct-connect RAS
service. You need to configure each terminal for use with the cradle, just as you would
configure any remote client to connect to an Internet Service Provider (ISP). To configure
the terminal install eConnect. See Installing eConnect on page 4-9.
1. On the terminal, tap Start - Settings - Control Panel - eConnect. The eConnect
window appears.
Figure 4-24. eConnect Properties - Docking Tab
2. Enable the Use eConnect for Docking Events checkbox.
3. Enable the Launch ActiveSync checkbox.
4. Tap OK.
4-30
®
CE .NET