Using The Ubc Battery Adapter - Symbol PPT 8800 Series Product Reference Manual

PPT 8800 Series Product Reference Guide for Embedded Windows
The spare battery charging LED turns red to indicate that the spare battery is charging. The
standard battery usually fully charges in approximately 2 1/2 hours and the optional larger
capacity battery usually fully charges in approximately five hours. See
Indicator on page 1-19 for spare battery charging indications.

Using the UBC Battery Adapter

1. Insert the appropriate battery adapter (up to four) into the UBC 2000 charger base.
2. Insert the battery into its appropriate adapter. Ensure the polarity markings on the
battery (+, -) match with those of the adapter.
When the battery is inserted, the charging system begins the rapid charge cycle. When this
cycle is completed, the "READY" indicator on the battery status display turns solid green,
and the battery is charged to approximately 95% of its rated capacity. To attain 100% of its
capacity the battery should remain in the charger for 3 hours. A charged battery may be
stored in the charger indefinitely. Upon completion of the charging cycle, the charger
switches to "Maintenance Mode" where it maintains the battery at 100% of its rated
capacity.
Do not charge a battery that is below 0° C (32° F) or above 45° C (113° F).
Allow the battery to warm up to room temperature before charging.
1-18
Battery Adapter
Battery status
display
Charger base
Figure 1-22. Inserting the Spare Battery
Caution
®
CE .NET
Charge LED