Symbol PPT 8800 Series Product Reference Manual page 144

PPT 8800 Series Product Reference Guide for Embedded Windows
configuration interface. The Cradle Utilities Version screen appears on the host
computer:
2. Press 1 to display the Public network settings menu:
3. From the Public network settings menu:
a. Press 1 to set the Static Mode. The Static Mode selection appears:
4-24
Cradle Utilities Version x.xx
Firmware Datecode: xxxxxxxx
1: Public network settings
2: Advanced settings
3: PPP settings
4: Private network settings
5: Firmware Download
Select a submenu OR:
Q: Discard changes and restart
F: Save changes and restart
Public network settings
1: Static Mode: 1
2: NAPT Mode: 1
The following settings are only used when Static
mode is 1
3: Cradle IP Address: 0.0.0.0
4: Router (Gateway) IP Address: 0.0.0.0
5: 1st DNS IP Address: 0.0.0.0
6: 2nd DNS IP Address: 0.0.0.0
7: 1st WINS IP Address: 0.0.0.0
8: 2nd WINS IP Address: 0.0.0.0
9: Subnet Mask: 0.0.0.0
The following settings are only used when
NAPT mode is 0 and Static mode is 1
A: Terminal 1 IP Address: 0.0.0.0
B: Terminal 2 IP Address: 0.0.0.0
C: Terminal 3 IP Address: 0.0.0.0
D: Terminal 4 IP Address: 0.0.0.0
E: Expansion Port IP Address: 0.0.0.0
Enter '1' to enable Static mode
Enter '0' to disable Static mode
Enter new value:
®
CE .NET